The Snake plan, easy to make, pretty tough puzzle

The Snake Plans

Easy to make, Pretty tough puzzle

(Something new, scroll down)
(More new stuff, scroll way down!)
(Outside USA? Scroll way, way down)

2 snakes

Here are 2 of my cherry wood snakes, one all together and one taken apart. These have about 36 to 38 pieces in each one. This can be a tough puzzle to put back together, notice I keep the pieces in order. These 2 were made from 1 1/4 inch X 1 1/4 inch Cherry, 28 inches long to start (the size I had on hand)

kathy

This is my grand daughter Kathy holding one of my big cherry snakes, the plan is very easy to enlarge to the size of your hardwood. I used 1 3/4 inch thick cherry for this one.

Whole bunch of snakes

Different sizes, The top and bottom ones are maple. Harder to work but strong! I use Minwax wood hardener on my Cherry snakes.

that's a long, long snake!

Something NEW! I finally finished a new "how to do it" DVD for the snake and lizard I believe will really help. Using slides and movies I give closeups and explain every step of the way. For a short sample, click here, This is a sample in the mpeg format so it should open if you have an older computer or a newer one. It's a bit blurry as I had to keep the size down online. The DVDs will be much clearer.

See what other woodworkers are saying about the Snake DVD, click here.For just the DVD at $7 + $2 s&h Just click the PayPal (Add to cart) button below, Or click on the DVD link on the right above.
Separately, these DVDs will sell for $7 plus $2 shipping and handling. If you buy one set of plans you can get the DVD for $5 plus s&h, saving $2. (If the button doesn't work for you, hold the Ctrl key while you click on the Paypal button.)

See what other woodworkers are saying about the Cobra DVD, click here.

MORE NEW STUFF!

While making the DVDs, I showed how to make a better looking tail, then later I finally thought of a way to make a much better looking eye for the cobra and the snake. Click here, all you snake makers will like these!

Snake/Lizard How to do it DVD

For just the Snake plans

For plans and the How to do it DVD (save $2.00) I'm now including plans and instructions on how to make a long snake. Here's a 7 foot snake next to a regular sized snake. Below, here's my son Phil, holding the long one.

Uncle Buck with a big long snake.

This big guy has 106 pieces, took awhile to make, I used two long boards but you could use 3 or 4 short pieces of wood if you wanted. Use those scraps! It's not that hard, and a lot easier to handle in the saw. Oh yes, be sure to check out the new Clamp assistant.

These plans run $9.00 postage paid in the USA. It isn't that hard to construct, involves no carving, only sanding. I use a 4 inch X 36 inch sander and a dremel rotary tool. Also a drill press and a bandsaw with a 1/8 inch blade, I'm sure a scrollsaw would work too.

If you live outside the USA there will be an additional charge of $.50 (50 cents) to help defray the postage differences for the snake plans.

Snake Plans The How to do it DVD won't work outside of the USA as it is recorded in the NTCS format, and most other countries use the PAL format. You could email me if your country uses the NTSC format.

If you are worried about giving out your credit card information, click on secure sites below to learn how it works.

Top

If you'd rather, you can just send a check or money order,
see Purchase Information below.

Las Vegas Plans

Home

Baby Gator plans

Bass plans

clamp assistant plans

Cobra snake plans

Cutthroat trout plans

Dinosaur plans

Dolphin plans

DVDs

DVD comments

Kangaroo Plans

Lizard plans

Las Vegas Puzzles

Links

LV Rubber band guns

Scorpion plans

Shark plans

Sitemap

Snake plans

Star plans

Tarantula plans

Tips & Hints

wedge clamp plans